High Gloss MDF: Maintenance and Instructions

Maintenance instructions

High gloss surface polishing

Decorative surface of Decorain High Gloss MDF Board may be cleaned with wooden furniture brightener, warm water or mild soaps such as those used for hands or dishes. Do not use cleansers that contain abrasives, acids or alkalis; they may damage the decorative surface. We recommend that you not allow any of the following agents to remain in contact with the surface: commercial cleaning products, abrasive cleaners, abrasive papers, acids and alkalis, solvents, thinners, turpentine, ammonia, bleach, acetone and any other cleaningagents containing organic solvents.

  • In cleaning of Venni High Gloss MDF, you can use damped –cotton fabric with soap – cotton fabric or non-alcoholic viscose bright surface cleansers. In this regard, you can eliminate the hand stains that can be occurred on the cover.
  • The dried and hardened stains can be cleaned after wiping with cotton fabric with synthetic thinner and drying it.
  • Never use alcoholic surface cleanser and scrubbing cleansers. In doing so, you cause the surface become matted and scattered.
  • Dish-wire, hard and dry wipes cause the surface damage. Do not use them.
  • Please pull down the protective folio on the cover. After removal of folio, do not touch the cover for 2 (two) hours.
  • You can make paste polish to eliminate the scratches occurred over the surface because of use. In doing so, covers become new.